WHICH LABEL TYPE DO YOU NEED INSTRUCTIONS FOR?
IRON ON CLOTHING LABELS
IRON ON CLOTHING LABEL INSTRUCTIONS
Please note: If garment is not suitable for hot iron be careful & iron at own risk. Never iron directly onto the label.
1. Preheat DRY iron to medium-high heat. Do not exceed garment recommended iron temperature.
2. Peel off the label & place onto fully dry garment, text side up. Please note: Labels applied to damp garments will not adhere properly.
3. Cover label with supplied parchment paper & press firmly with iron for 8–10 seconds.
4. If edges are not fully stuck (try peeling label off with fingernail), you may need to increase temperature, pressure or time & repeat above steps.
5. Safety Check: Before giving any item to small children, check that the name labels are fully and safely adhered.
WARNING: Labels can be a choking hazard.
STICK ON CLOTHING LABELS
STICK ON CLOTHING LABEL INSTRUCTIONS
Please Note: To be adhered to garment tags only. Labels may not remain stuck when adhered to clothing fabric.
1. Prepare: Ensure the garment tag is clean & dry. Note or photograph any special care instructions that will be covered.
2. Apply: Peel and stick the label onto the garment tag, then rub firmly, especially the edges.
3. Wait: Allow 24 hours for the label to cure before wearing or washing.
4. Safety Check: Before giving any item to small children, check that the labels are fully and safely adhered.
WARNING: Labels can be a choking hazard.
Good To Know: May be used in the dishwasher on the top shelf only.
STICKY LABELS (HARD SURFACES)
STICKY LABEL (HARD SURFACES) INSTRUCTIONS
1. Stick labels to smooth surfaces that are clean & dry. The following surfaces may not be compatible: Fabric, clothing, highly textured surfaces, plastics that contain high silicone (non-stick) or have a greasy feel.
2. Rub firmly over the whole label, especially the edges.
3. Wait 2–3 days for the adhesive to cure. When in the dishwasher, place items with labels on the top shelf & do not use high temperature settings such as “pots & pans”.
4. Safety Check: Before giving any item to small children, check that the labels are fully and safely adhered.
WARNING: Labels can be a choking hazard.
Good To Know: Paper labels such as Address, Book and Gift Labels are not waterproof and thus not suited for uses such as dishwasher, microwave, freezer etc.
QR CODE LABELS
QR IRON ON CLOTHING LABEL INSTRUCTIONS
IRON ON CLOTHING LABEL INSTRUCTIONS
Please note: If garment is not suitable for hot iron be careful & iron at own risk. Never iron directly onto the label.
1. Preheat DRY iron to medium-high heat. Do not exceed garment recommended iron temperature.
2. Peel off the label & place onto fully dry garment, text side up. Please note: Labels applied to damp garments will not adhere properly.
3. Cover label with supplied parchment paper & press firmly with iron for 8–10 seconds.
4. If edges are not fully stuck (try peeling label off with fingernail), you may need to increase temperature, pressure or time & repeat above steps.
5. Safety Check: Before giving any item to small children, check that the name labels are fully and safely adhered.
WARNING: Labels can be a choking hazard.
QR STICK ON CLOTHING LABEL INSTRUCTIONS
STICK ON CLOTHING LABEL INSTRUCTIONS
Please Note: To be adhered to garment tags only. Labels may not remain stuck when adhered to clothing fabric.
1. Prepare: Ensure the garment tag is clean & dry. Note or photograph any special care instructions that will be covered.
2. Apply: Peel and stick the label onto the garment tag, then rub firmly, especially the edges.
3. Wait: Allow 24 hours for the label to cure before wearing or washing.
4. Safety Check: Before giving any item to small children, check that the labels are fully and safely adhered.
WARNING: Labels can be a choking hazard.
Good To Know: May be used in the dishwasher on the top shelf only.
QR STICKY LABEL (HARD SURFACES) INSTRUCTIONS
STICKY LABEL (HARD SURFACES) INSTRUCTIONS
1. Stick labels to smooth surfaces that are clean & dry. The following surfaces may not be compatible: Fabric, clothing, highly textured surfaces, plastics that contain high silicone (non-stick) or have a greasy feel.
2. Rub firmly over the whole label, especially the edges.
3. Wait 2–3 days for the adhesive to cure. When in the dishwasher, place items with labels on the top shelf & do not use high temperature settings such as “pots & pans”.
4. Safety Check: Before giving any item to small children, check that the labels are fully and safely adhered.
WARNING: Labels can be a choking hazard.
Good To Know: Paper labels such as Address, Book and Gift Labels are not waterproof and thus not suited for uses such as dishwasher, microwave, freezer etc.
SHOE LABELS & PROTECTIVE OVERLAYS
SHOE LABELS & PROTECTIVE OVERLAY INSTRUCTIONS
Before adding extra protection with overlays make sure your Sticky Name Labels are stuck down well... Instructions HERE
1. Choose the corresponding overlay and simply stick it over the label. For optimal results, ensure an even overlap on all sides.
2. Firmly rub over the entire label, paying special attention to the edges.
3. Safety Check: Before giving any item to small children, check that the labels are fully and safely adhered.
WARNING: Labels can be a choking hazard.
Good To Know: Overlays are great for any high contact applications such as shoes, keys, sport equipment, drink bottles and earbud cases.
TIP: When applying to shoes remove the insoles (if they come out). It's a lot easier!
STICKY LABEL (HARD SURFACES) INSTRUCTIONS
1. Stick labels to smooth surfaces that are clean & dry. The following surfaces may not be compatible: Fabric, clothing, highly textured surfaces, plastics that contain high silicone (non-stick) or have a greasy feel.
2. Rub firmly over the whole label, especially the edges.
3. Wait 2–3 days for the adhesive to cure. When in the dishwasher, place items with labels on the top shelf & do not use high temperature settings such as “pots & pans”.
4. Safety Check: Before giving any item to small children, check that the labels are fully and safely adhered.
WARNING: Labels can be a choking hazard.
Good To Know: Paper labels such as Address, Book and Gift Labels are not waterproof and thus not suited for uses such as dishwasher, microwave, freezer etc.
PAPER LABELS (E.G. BOOK, GIFT, TEACHER & REWARD STICKERS)
PAPER NAME LABEL INSTRUCTIONS
Paper Labels are not waterproof and thus not suited for uses such as dishwasher, microwave, freezer etc.
1. Stick labels to smooth surfaces that are clean & dry.
2. Rub firmly over the whole label, especially the edges.
3. Safety Check: Before giving any item to small children, check that the labels are fully and safely adhered.
WARNING: Labels can be a choking hazard.
CLOTHING NAME STAMP
Welcome Happy Stamper!
Tinyme Name Stamps are lovingly pre-inked in the Tinyme Studio, and are ready to get STAMPING the moment they're out of the box!
Recommended Fabrics
• Cotton
• Elastane
Unsuitable Fabrics
• Nylon or Polyester
• Smooth or Satin
• Clothing Care Tag
Before You Apply
1. We recommend testing stamping on a spare piece of clothing or paper to perfect your stamping quality (imprint location & pressure).
2. The clothing ink may bleed through thinner garments, so get your Blank Iron-On Labels ready if you have them.
Note: Applying greater pressure while stamping will result in more ink being released during the imprint.
How To Apply
1. Lay your garment on a flat, smooth and hard surface.
2. Locate the desired stamp location and apply moderate pressure to leave an impression.
3. Leave for 24 hours before use or washing.
For Darker Or Thin Fabrics
Use our Blank Iron-On Labels to create a clearer impression for thinner or darker clothes. To apply;
1. Peel a blank label from the Blank Iron-On Labels sheet.
2. Use a dry iron to apply the blank label to the dark garment.
3. Wait for your label to cool down, then STAMP AWAY!
For detailed instructions on how to iron on your label, click here
IRON ON CLOTHING LABEL INSTRUCTIONS
Please note: If garment is not suitable for hot iron be careful & iron at own risk. Never iron directly onto the label.
1. Preheat DRY iron to medium-high heat. Do not exceed garment recommended iron temperature.
2. Peel off the label & place onto fully dry garment, text side up. Please note: Labels applied to damp garments will not adhere properly.
3. Cover label with supplied parchment paper & press firmly with iron for 8–10 seconds.
4. If edges are not fully stuck (try peeling label off with fingernail), you may need to increase temperature, pressure or time & repeat above steps.
5. Safety Check: Before giving any item to small children, check that the name labels are fully and safely adhered.
WARNING: Labels can be a choking hazard.
TEACHER STAMPS
Welcome Happy Stamper!
Tinyme Teacher Stamps are lovingly pre-inked in the Tinyme Studio, and are ready to get STAMPING the moment they're out of the box!
Recommended Paper
• Everday Office Paper
• Notebook Paper
Unsuitable Paper
• Coated or Shiny Paper
Before You Apply
1. We recommend test stamping on a spare piece of paper to perfect your stamping quality (imprint location & pressure).
Note: Applying greater pressure while stamping will result in more ink being released during the imprint.
How To Apply
1. Lay your paper on a flat, smooth and hard surface.
2. Locate the desired stamp location and apply moderate pressure to leave an impression.
STAMP INK REFILL INSTRUCTIONS
Rectangle Stamp - Ink Refill Instructions
1. Remove the Stamp Pad by pressing on the left and right latches
2. Flip the Stamp Pad. Place 1 to 2 drops of ink into each hole.
3. Repeat Step 2 until the pad no longer soaks up ink
4. Place the Stamp Pad back into the stamp shell
Note: If the ink pad no longer absorbs ink, it has been overfilled. Simply flip the stamp pad (holes facing down) onto a paper towel until the excess ink has drained.
Login and Registration Form